Na-akpakọrịta na Ahịa? Ngwa
Vanessa Ms. Vanessa
Kedu ihe m ga-emere gị?
Nkata Ugbu a Ngwongwo ndi ozo
 Tel:86-752-3635620 Email:vanessa@mayflay.com
Home > Ngwaahịa > Decoiler Straightener Feeder > Inye Nri na Ngwunye Aka > 3 Na 1 Nweta NC Servo Straightener Feeder
3 Na 1 Nweta NC Servo Straightener Feeder
3 Na 1 Nweta NC Servo Straightener Feeder
3 Na 1 Nweta NC Servo Straightener Feeder
3 Na 1 Nweta NC Servo Straightener Feeder
3 Na 1 Nweta NC Servo Straightener Feeder
  • 3 Na 1 Nweta NC Servo Straightener Feeder
  • 3 Na 1 Nweta NC Servo Straightener Feeder
  • 3 Na 1 Nweta NC Servo Straightener Feeder
  • 3 Na 1 Nweta NC Servo Straightener Feeder
  • 3 Na 1 Nweta NC Servo Straightener Feeder

3 Na 1 Nweta NC Servo Straightener Feeder

    Ụdị Ụgwọ: L/C,T/T
    Incoterm: FOB,CFR,CIF
    Min. Nhazi: 1 Bag/Bags
    Oge Mbuga ozi: 15 Ụbọchị

Ama Ama

Ihe Nlereanya.: MAC1-300

Applications: Pressing Line/Metal Stamping Line/Forming Line

Product Name: Coil Press Auto NC Servo Roll Feeder Machine

Applicable Coil Width: 20mm-1300mm

Applicable Coil Thickness: 0.3-3.2mm

Releasing Type: Pneumatic

PLC: Mitsubishi, Japan

Servo Motor: Mitsubishi, Japan

Servo Driver: Mitsubishi, Japan

Touch Screen: WEINVIEW, Taiwan

Function: Feeding The Coil Strips Into The Press Machine

Additional Info

Nkwakọ ngwaahịa: Osisi osisi

Ubu oke: 100 sets

Eke: Meeflay

Ụgbọ njem: Ocean,Land,Air

Ebe Mmalite: China

Inye Ike: 100 sets

Akwụkwọ: CE

Usoro HS: 84283920.00

Port: Shenzhen

Nkọwapụta ngwaahịa

Product Description


Mkpịsị akwụkwọ nri na Design oghere. Azịza dị ọnụ ahịa.

3 n'ime 1 NC servo akpaka mpempe akwụkwọ coem stamping feeder machine decoiler straightener feeder maka ụgbọ ala chassis akụkụ mmepụta ahịrị


Mayflay 3 na 1 ụgbọ ala mapụtara n'ihu kọlụm stiffene akụkụ punching system decoiler straightener cum NC Servo feeder maka auto akụkụ mmepụta akara.


 NC Servo Roll Feeder Machine
Model:MAC1-300
Model MAC1-300
Stock Width(mm) 50-300
Stock Thickness(mm) 0.2-3.0
Max.Coil Weight(kg) 3000
Max.Coil O.D.(mm) 1200
Coil I.D.(mm) 508
Feed Length(mm) ~400*
Max. Line Speed(m/min) 16-24
Straightener Rolls(pieces) upper 4/ lower 3
Feed Rolls (set) 1
Main Motor AC2.0
Mandrel Expansion Manual/hydraulic
Unoiler Motor(kw) 1.5
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49
Straigtening performance
Material Tech-info of thickness & Width MAC1-300
0.2 300
0.4
0.6
0.8
1
1.2
1.4
1.6 250
2 190
2.3 160
3 110

Remark:

1) Ihe ogugu di n’elu bu ihe ndi nwere ume kariri = 245N / mm², Max. tensile ike σb = 392 N / mm²)
2) Nkọwapụta dị iche iche ga-agbanwe maka ndozi na-enweghị ọkwa.

Products Show

Combined decoiler straightener feeder


Application


Stgbọala, ihe eji arụ ọrụ, kọmpụta na kọmputa, ihe ngwaike na akụkụ igwe wdg.



Decoiler Straightener Feeder


Akụkụ omogbọala: Bracket, Damper, Barke Pad, Tie Bar, ngwa eletriki, Akụ nke mpempe akwụkwọ, okpo komputa, mkpọda oche nke ụgbọ ala, sọks ahụ nke ụgbọ ala wdg.


Compact Press Feed line


MAC1-400 NC Servo 3 Na 1 Straightener Feeder Uncoiler na -arụ ọrụ na ụlọ ọrụ ndị ahịa anyị.


NC Servo 3 na 1 Straightener Feeder Uncoiler maka idozi ahịrị ụzọ nkedo ígwè.

Nke a bụ otu n'ime ndị ahịa anyị na Slovenia, ha na-arụpụta akụkụ mpempe akwụkwọ na NC serv o 3 na 1 jikọtara nri nri kwụ ọtọ .

Site na njikwa Yaskawa Servo na Mitsubishi PLC, akara nri nwere ike iru ± 0.15mm nri n'ụzọ ziri ezi.


Uncoiler straightener Feeder machine

Combined Hydraulic Decoiler Leveling Nc Servo Press Coil Sheet Feed Line MAC1


Our Company


M ayflay ụlọ ọrụ na-a elu àgwà emeputa niile ụdị eriri igwe Ijikwa Equipment na Press udia ngwá na China. Ndị na-emepụta Decoilers dị iche iche , Straighteners na ndị na- eri nri Servo , ma nwee ike ịnye ọmarịcha ngwakọta nke 2 n'ime 1 ndị na-eme ihe ndozi na ndị na-ahụ maka ọkụ , na-enwekwa ọmarịcha kọmpụta kọmpụta kọmpụta nke ga-ebelata mbara ala ma meziwanye eri oge n'ụzọ dị arọ coils.


Maylọ ọrụ Mayflay na-amụ teknụzụ ndị Japan ma jiri ụkpụrụ dị elu dị na nhọrọ akụkụ, usoro mgbakọ na akụkụ ahụ, na-elekwasị anya na ịchepụta ma na-enye ihe ngosi, Ngwọta Igwe Ngwọta Cost na- akwụ ụgwọ na akpaaka Stamping Stamping Line . Mayflay tolitere na teknụzụ mbepụ na ọrụ nlebara anya. Mayflay na-enye otu nkwụsị iji dozie nsogbu nke inye eriri ọkpọkọ n'ime ụlọ mgbasa ozi nke ọma, na ịba ụba ngwa ahịa. Taa, Mayflay bụ ụlọ ọrụ raara onwe ya nye nke na-egosipụta akụrụngwa nke nwere ezigbo aha, ikike ọrụ, njikwa ọgbara ọhụrụ, netwo ahịa dị ukwuu, na ahịa dị egwu.


Mayflay abụghị nke kachasị mma n'ụwa, ọnụahịa abụghịkwa ọnụ ala. Mana anyị nwere ike ịnye ngwaahịa kachasị mma iji rute ihe ịchọrọ ma nyere gị aka inweta uru akụ na ụba kachasị.


Packing & Delivery


Nkọwa ngwongwo: ikpe osisi
Nkọwapụta mbata: ụbọchị 30-70
Zọ mbupu: mbufe mmiri


FAQ


1. you ga-enye ọrụ OEM / ODM?
Anyị na-enye ọrụ OEM maka ndị asọmpi anyị si mba Europe na ụlọ ọrụ Janpan.


2. Kedu asambodo ị nwetara?
Ngwaọrụ anyị bu ISO9001 gosipụtara. Anyị nwetara asambodo CE maka ngwaahịa ndị ahụ.
gụnyere Feeder igwe, igwe uncoiler, igwe eji achọ mma, igwe akuko nke di elu na wdg.


3.Gini bu oge mbufe diri igwe anyi?

Onye na-enye nri, igwe uncoiler bụ 1-20 ụbọchị ọrụ.
Igwe eji akuko ngwa ngwa di elu bu 5-35 nke ubochi.
Decoiler straightener feederer 3 na 1 igwe bụ 15-65workdays.
Uncoiler straightener 2 na 1 igwe bụ 1-25 ụbọchị ọrụ.
Oge ụfọdụ, igwe anyị nwere ngwaahịa.


4.Gịnị bụ njikwa ogo dị n'ụlọ ọrụ?
Anyị na-enyocha igwe ahụ dịka ọkọlọtọ ISO 9001 ma nwalee igwe ahụ tupu oge ahụ.
nnyefe ma anyị na-eme igwe anyị nwere akụrụngwa CNC na ụlọ ọrụ anyị. Ngwa igwe anyị bụ nke dị elu.


Ngwaahịa : Decoiler Straightener Feeder > Inye Nri na Ngwunye Aka

Email na ngwaahịa a
  • Ms. Vanessa
  • Ozi gị ga-adị n'etiti edemede 20-8000

Ndepụta Ngwaahịa metụtara

Home

Phone

Skype

Nchoputa